FUJIFILM INSTAX Mini Instant Film (sold separately)
Number of films
86 mm x 54 mm
62 mm x 46 mm / 2.4 in. x 1.8 in.
Supported image size
800 × 600 dots
12.5 dots/mm (318 dpi, 80 μm dot pitch)
256 levels per color (RGB)
Standard compliance: Bluetooth Ver. 4.2 (BLE)
Supported image format
Image recording – photo output (fed out):Approximately 12 sec.
Approximate printing capacity
Approximately 100 prints (from full charge)
*The number of prints depends on the usage conditions.
Lithium ion battery (internal type: not removable)
Approximately 80 to 120 minutes(Charging time depends on the temperature and battery remaining level)
Approximately 3 W
Temperature: +5°C to +40°C (+41°F to +104°F)
Humidity: 20% to 80% (no condensation)
Main unit dimensions
3.6 in × 1.4 in × 4.9 in / 91.9 mm × 36.4 mm × 124.8 mm (excluding projecting parts)
Main unit mass
Approximately 0.46 lbs / 210 g (excluding film pack)
Draw with the printer
Hold down the feature button on your mini Link 2 and start swinging those arms around to enter the virtual world of . If the printer is vibrating it means it’s working, so whatever you decide to draw, be it an umbrella, squiggles or even a heart*, it’ll appear on your image.
The instax prints depicted are for illustrative purposes only.
Specifications above are subject to change for improvement.
The BluetoothR wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.
The text QR code is a registered trademark and wordmark of Denso Wave Incorporated
The image size may affect sharpness and graininess of the finished print.
Depending on the file size and smartphone type, wireless communication may take a long time.
The smartphone type and shooting condition may affect the color tone and quality of the finished print.
The finished print may look different from the image viewed on the smartphone display.